Model No. : EH 260
Scope of Supply :
1. Hot Water Heat Pump with solar coil :
Make : Climer, Spain
Model : EH 260
Heat Pump Output : 1.841 Kw
Electrical Heater : 1.5 Kw
Heat Pump Input : 0.496 Kw
Electrical : 230 V, 1pH, 50 Hz
COP : 3.7
Water Tank Capacity : 260 Ltrs.
MOC Tank : Stainless Steel
Coil MOC : Stainless Steel
2. Thermal Solar Collector with modular powder coated support structure – 2 Nos.
3. Solar Pump Station : RESOL FlowSol S
Consists of : Wall Mounting Bracket, Insulation, Drain Valve, Ball with integrated non-return valve, Fill valve, Pump, Pressure Guage, Flowmeter, Safety Valve 6 Bar.)
4. Solar Controller : RESOL Delta Sol AL with 2 sensors
5. De-aerator Valve – 1 No. : Tiemme, Italy
6. Copper Pipings with EPDM insulation and fittings
7. Installation, Testing & Commissioning.
Make : Solarflame MAX
Thermal Solar Collector :
|Overall Dimensions : 1980 x 1010 x 86 mm |
|Frame of the collector : Aluminium profile powder coated for maximum protection in seaside areas. |
|Absorber surface : Aluminium surface with blue titanium high selective treatment with absorbence and low emission (Alpha = 95%, beta = 4%), laser welded on the copper water frame. |
|Transparent Cover : Security-Tempered prismatic solar glass for maximum protection against extreme weather conditions and temperature changes. |
|Header of water frame : Copper tubes dia 22mm, which is welded to the vertical tubes with hard silver solder. Each water frame is tested at the pressure of 15 bars. Headers are punched with upper expansion for perfect fitting with vertical tubes and minimum pressure drop in the collector. |
|Thermal insulation : 40mm thock layer of prepressed black mineral wool special for solar panels for minimum thermal loss. Rockwool insulation thermal conductivity : 0=0.035 W/m oK (EN13162) and heat capacity 0.84 kJ/kgK. |
|Back Cover : Aluzinc 0.4mm thick. Aluzinc stands for aluminium and zinc, fused in almost equal proportions, as a coating for the steel sheet that is coated with a silvery spangle composed of Aluminium (55%), Zinc (43.4%) and a touch of silicon (1.6%). Great mechanical strength and 7 times more resisted to corrosion than common galvanized steel. |
|Sealing Materials : For perfect waterproof finish and proper ventilation of collectors casing, all materials used (EPDM, polyurethane sealant) resist to extreme weather conditions and temperature changes. |
There are no reviews yet.